Manual

Q207.001

PARTS LIST

1 Main Jet DJ128

1 Main Jet DJ132

1 Main Jet DJ136

1 Fuel Needle DNO105

2 Adjusting Washer DW0001

1 E-Clip DE0001

STAGE 1

For mildly tuned machines using the stock

airbox, with stock or aftermarket filter. May

also be used with a good aftermarket

exhaust system. K&N Filter# KA-4093.

1997-98 Kawasaki 400

Prairie

PAGE 1
Q207.001 1997-98 Kawasaki 400 Prairie STAGE 1 For mildly tuned machines using the stock airbox, with stock or aftermarket filter. May also be used with a good aftermarket exhaust system. K&N Filter# KA-4093.
PAGE 2
Q207.001 STAGE ONE INSTRUCTIONS 1. Remove vacuum slide from carb. Remove stock needle & spacers, noting order of assembly. 2. Install Dynojet needle on groove# 3 for applications below 5000 feet, groove #2 for above 5000 feet, using all stock spacers. Install the Dynojet washers above the E-clip. 3. Remove stock main jet and replace with Dynojet main provided. Use the DJ136 below 3000 feet, DJ132 from 3000 to 6000 feet and DJ128 above 6000Feet. Be sure that the jet you are changing is the main jet. 4.