Manual

Q209.001

PARTS LIST

1 Main Jet DJ126

1 Main Jet DJ130

1 Main Jet DJ134

1 Main Jet DJ138

1 Main Jet DJ142

1 Main Jet DJ146

1 Fuel Needle DNO106

2 Adjusting Washer DW0001

1 E-Clip DE0001

STAGE 1

For mildly tuned machines using the stock

airbox, with stock or aftermarket filter. May

also be used with a good aftermarket

exhaust system. K&N Filter # KA-4093.

1999-2001 Kawasaki 400

Prairie

PAGE 1
Q209.001 1999-2001 Kawasaki 400 Prairie STAGE 1 For mildly tuned machines using the stock airbox, with stock or aftermarket filter. May also be used with a good aftermarket exhaust system. K&N Filter # KA-4093.
PAGE 2
Q209.001 STAGE ONE INSTRUCTIONS 1. Remove vacuum slide from carb. Remove stock needle & spacers, noting order of assembly. 2. Install Dynojet needle on groove# 4 for applications below 5000 feet, groove #3 for above 5000 feet, using all stock spacers. Install the Dynojet washers above the E-clip. 3. Remove stock main jet and replace with Dynojet main provided. If you are running the stock exhaust use the DJ138 below 3000 feet, DJ134 from 3000 to 6000 feet and DJ130 above 6000 feet.