User Manual

Q221.001

2008 Kawasaki

KRF750 Teryx

Stage 1

For mildly tuned machines using the stock airbox with

stock or aftermarket filter. May also be used with a

good aftermarket exhaust system.

Parts List

1 Main Jet DJ122

1 Main Jet DJ126

1 Main Jet DJ130

1 Main Jet DJ134

1 Main Jet DJ138

1 Main Jet DJ142

1 Main Jet DJ146

1 Main Jet DJ150

2 Fuel Needles DNO207

4 Adjusting Washers DW0001

2 E-Clips DE0001

2 Slide Springs DSP027

1 Plug Drill DD 5/32

1 Screw DS0001

PAGE 1
Q221.001 2008 Kawasaki KRF750 Teryx Stage 1 For mildly tuned machines using the stock airbox with stock or aftermarket filter. May also be used with a good aftermarket exhaust system.
PAGE 2
STAGE ONE INSTRUCTIONS Q221.001 1. Remove vacuum slides from carbs. Remove stock needles & spacers, noting order of assembly (Fig.A). 2. Install Dynojet needles on groove #2 for applications below 5000 feet, groove #1 for above 5000 feet. Install the Dynojet washers above the E-clip, 2 per needle (Fig.A). 3. Install the Dynojet slide springs DSP027, in place of the stock slide springs. 4.