Owner's manual

1999-2001 Polaris

Q506.001

PARTS LIST

1 Main Jet DJ142

1 Main Jet DJ146

1 Main Jet DJ150

1 Main Jet DJ155

1 Main Jet DJ160

1 Main Jet DJ165

1 Fuel Needle DNO366

1 Adjusting Washer DW0001

1 E-Clip DE0001

STAGE 1

For mildly tuned machines using the stock

airbox, with stock or aftermarket filter. May

also be used with a good aftermarket

exhaust system. K&N Filter # PL-1003

500 Magnum 4X4

PAGE 1
Q506.001 1999-2001 Polaris 500 Magnum 4X4 STAGE 1 For mildly tuned machines using the stock airbox, with stock or aftermarket filter. May also be used with a good aftermarket exhaust system.
PAGE 2
Q506.001 STAGE ONE INSTRUCTIONS 1. Remove vacuum slide from the carb. Remove stock needles & spacers, noting order of assembly (Fig. A). 2. Install Dynojet needle on groove#4 for applications below 3000 feet, groove #3 for above 3000 feet, using all stock spacers. Install the Dynojet washer above the E-clip. 3. Remove stock main jet. If you are running the stock exhaust use the DJ155 below 3000 feet, DJ150 from 3000 to 6000 feet and DJ146 above 6000Feet.