Owner's manual

Q507.001

2000-2001 Polaris

Sportsman 335

Stage 1

For mildly tuned machines using the stock airbox with

stock or aftermarket filter. May also be used with a

good aftermarket exhaust system.

Parts List

1 Main Jet DJ146

1 Main Jet DJ150

1 Main Jet DJ155

1 Main Jet DJ160

1 Main Jet DJ165

1 Main Jet DJ170

1 Fuel Needle DNO466

1 Adjusting Washers DW0001

1 E-Clip DE0001

PAGE 1
Q507.001 2000-2001 Polaris Sportsman 335 Stage 1 For mildly tuned machines using the stock airbox with stock or aftermarket filter. May also be used with a good aftermarket exhaust system.
PAGE 2
Q507.001 STAGE ONE INSTRUCTIONS 1. Remove vacuum slide from the carb. Remove stock needles & spacers, noting order of assembly (Fig. A). 2. Install Dynojet needle on groove #3 for applications below 3000 feet, groove #2 for above 3000 feet, using all stock spacers. Install the Dynojet washer above the E-clip. This is Groove # 1 3. Remove stock main jet. If you are running the stock exhaust use the DJ160 below 3000 feet, DJ155 from 3000 to 6000 feet and DJ150 above 6000 feet.