User Manual

2000-2001 SUZUKI LTF300

Q307.001

PARTS LIST

1 Main Jet DJ100

1 Main Jet DJ102

1 Main Jet DJ104

1 Main Jet DJ106

1 Main Jet DJ108

1 Main Jet DJ110

1 Main Jet DJ112

1 Main Jet DJ114

1 Fuel Needle DNO361C

1 Adjusting Washer DW0001

1 Slide Spring DSP005

1 Needle Spring DSP77

1 E-Clip DE0001

STAGE 1

King Quad

For mildly tuned machines using the stock

airbox with stock or aftermarket filter. May

also be used with a good aftermarket

exhaust system. K&N Filter # SU-2588.

PAGE 1
Q307.001 2000-2001 SUZUKI LTF300 King Quad STAGE 1 For mildly tuned machines using the stock airbox with stock or aftermarket filter. May also be used with a good aftermarket exhaust system. K&N Filter # SU-2588.
PAGE 2
Q307.001 STAGE ONE INSTRUCTIONS 1. Remove the vacuum slide from the carb. Remove the stock needles & spacers, noting order of assembly (Fig.A). 2. Install the Dynojet needle on groove#3 for applications below 3000 feet, groove #2 for above 3000 feet, using all stock spacers. Install the Dynojet slide spring (DSP005) in place of the stock slide spring. NOTE: The DSP77 spring does not have to be installed at this time. It is supplied in case the stock spring is misplaced. 3.