User guide

Q301.001

PARTS LIST

1 Main Jet DJ092

1 Main Jet DJ096

1 Main Jet DJ100

1 Main Jet DJ104

1 Main Jet DJ108

1 Fuel Needle DNO205

1 Adjusting Washer DW0001

1 E-Clip DE0001

STAGE 2

For mildly tuned machines using the stock

airbox, with the lid removed, with stock or

aftermarket filter. May also be used with a

good aftermarket exhaust system.

K&N Filter # SU-1691

1991-2001 SUZUKI LT160

PAGE 1
Q301.001 1991-2001 SUZUKI LT160 STAGE 2 For mildly tuned machines using the stock airbox, with the lid removed, with stock or aftermarket filter. May also be used with a good aftermarket exhaust system.
PAGE 2
Q301.001 STAGE TWO INSTRUCTIONS 1. Unscrew the carb top. Disconnect throttle cable and remove the slide. Remove needle retainer.(Fig.A). 2. Install Dynojet needle on groove# 3 for applications below 5000 feet, groove #2 for above 5000 feet, using all stock spacers. Install the Dynojet washer above the E-clip. 3. Remove stock main jet and replace with Dynojet main provided. Use the DJ100 below 3000 feet, DJ096 from 3000 to 6000 feet and DJ092 above 6000Feet.