Owner's manual

4320.002

1987~2006 Yamaha

Banshee

Stage 3

For mildly tuned machines with the airbox

removed and K&N individual air filters. May also be

used with a good aftermarket exhaust system

K&N Filter # RU-0210 (2)

Parts List

2 Main Jet DXP270

2 Main Jet DXP280

2 Main Jet DXP340

2 Fuel Needle DNO304

2 Adjusting Washers DW0001

2 E-Clips DE0001

PAGE 1
4320.002 1987~2006 Yamaha Banshee Stage 3 Stage 3 For mildly tuned machines with the airbox removed and K&N individual air filters.
PAGE 2
4320.002 STAGE THREE INSTRUCTIONS 1. Unscrew the carb tops. Disconnect throttle cables and remove the slides. Remove needle retainers and stock needles(Fig.A). 2. Install Dynojet needles on groove #4 for applications below 5000 feet, groove #3 for above 5000 feet. The Dynojet washers are for half step adjustments and do not need to be installed at this time. 3. Remove stock main jets and replace with Dynojet main jets provided. Use the DXP270 with the stock exhaust.