Owner manual

Q405.001

PARTS LIST

1 Main Jet DJ098

1 Main Jet DJ102

1 Main Jet DJ106

1 Fuel Needle DNO240

1 Adjusting Washer DW0001

1 E-Clip DE0001

STAGE 1

For mildly tuned machines using the stock

airbox, with stock or aftermarket filter. May

also be used with a good aftermarket

exhaust system. K&N Filter# YA-2597.

1993-98 Yamaha YFM400

Kodiak

PAGE 1
Q405.001 1993-98 Yamaha YFM400 Kodiak STAGE 1 For mildly tuned machines using the stock airbox, with stock or aftermarket filter. May also be used with a good aftermarket exhaust system. K&N Filter# YA-2597.
PAGE 2
Q405.001 STAGE ONE INSTRUCTIONS 1. Remove top carb plate. Remove the slide lift arm screw and the two needle plate screws. Flip the linkage forward and remove the slide (Fig. A). 2. Install Dynojet needle on groove#3 for applications below 5000 feet, groove #2 for above 5000 feet, using all stock spacers. Install the Dynojet washer above the E-clip. 3. Remove stock main jet and replace with Dynojet main provided. Use the DJ106 below 3000 feet, DJ102 from 3000 to 6000 feet and DJ098 above 6000Feet.