Owner's manual

Q406.002

1993-2004 Yamaha

350 Warrior

Stage 1 & 2

Stage 1

For mildly tuned machines using the stock airbox with stock or

aftermarket filter. May also be used with a good aftermarket

exhaust system.

Parts List

1 Main Jet DJ126

1 Main Jet DJ128

1 Main Jet DJ130

1 Main Jet DJ132

1 Main Jet DJ134

1 Main Jet DJ136

1 Main Jet DJ138

1 Main Jet DJ140

1 Main Jet DJ142

1 Main Jet DJ144

1 Main Jet DJ146

1 Main Jet DJ148

1 Main Jet DJ150

1 Fuel Needle DNO240

1 Adjusting Washer DW0001

1 E-Clip DE0001

Stage 2

For mildly tuned machines using a modified airbox, with stock or

aftermarket filter. May also be used with a good aftermarket

exhaust system.

PAGE 1
Q406.002 1993-2004 Yamaha 350 Warrior Stage 1 & 2 Stage 1 For mildly tuned machines using the stock airbox with stock or aftermarket filter. May also be used with a good aftermarket exhaust system. Stage 2 For mildly tuned machines using a modified airbox, with stock or aftermarket filter. May also be used with a good aftermarket exhaust system.
PAGE 2
Q406.002 STAGE ONE INSTRUCTIONS STAGE TWO INSTRUCTIONS 1. Remove top carb plate. Remove the slide lift arm screw and the two needle plate screws. Flip the linkage forward and remove the slide (Fig. A). You must modify your airbox lid to run stage two settings. 2. Install Dynojet needle on groove #4 for applications below 5000 feet, groove #3 for above 5000 feet, using all stock spacers. 3. Remove the stock main jet and replace with the Dynojet main jet provided.