Instruction Manual

Q402.001

PARTS LIST

1 Main Jet DJ112

1 Main Jet DJ114

1 Main Jet DJ116

1 Main Jet DJ118

1 Main Jet DJ120

1 Main Jet DJ122

1 Fuel Needle DNO180

1 Adjusting Washer DW0001

1 E-Clip DE0001

STAGE 1

For mildly tuned machines using the stock

airbox, with stock or aftermarket filter. May

also be used with a good aftermarket

exhaust system. K&N Filter# YA-4350.

1994-95 Yamaha YFM350

Wolverine

PAGE 1
Q402.001 1994-95 Yamaha YFM350 Wolverine STAGE 1 For mildly tuned machines using the stock airbox, with stock or aftermarket filter. May also be used with a good aftermarket exhaust system. K&N Filter# YA-4350.
PAGE 2
Q402.001 STAGE ONE INSTRUCTIONS 1. Remove top carb plate. Remove the slide lift arm screw and the two needle plate screws. Flip the linkage forward and remove the slide (Fig. A). 2. Install Dynojet needle on groove#3 for applications below 5000 feet, groove #2 for above 5000 feet, using all stock spacers. Install the Dynojet washer above the E-clip. 3. Remove stock main jet and replace with Dynojet main provided.