NOTES: 1 of 10 F:\Instructions\ALK300-00 Installation Instructions.
High Lifter Products, Inc. 780 Professional N Dr. Shreveport, LA 71105 (318) 524-2270 Fax (318) 524-2297 Arctic Cat 300 2x4, 4x4 Lift Kit Installation Instructions Read before Installation This product is designed for use on ATVs on which additional ground clearance and fender clearance is desired. It is designed for utility type, slower-speed use on relatively flat terrain in deep mud or snow.
Parts List “A” – 2 “B” - 2 “D”- 4 ¼” “E” – 2 13/16” “F” -2 ¾” “C” – 2 ¾” “G” -2 “H”-2 1” 3 of 10 F:\Instructions\ALK300-00 Installation Instructions.
of 10 F:\Instructions\ALK300-00 Installation Instructions.
Arctic Cat Product Line Up Lift Kit – Generates 1.5” – 2” of additional Ground Clearance. Outlaw Tires 25x9.50x12 25x12x12 26x10x12 26x12x12 27x9.50x12 27x12x12 28x9.50x12 28x10.5x12 28x12.50x12 ITP Steel/Aluminum Wheels.
1) Place jack under center of ATV front end and lift until front wheels clear the ground. Be careful to support ATV properly so that it is secure, but so that the A-arms and shocks can droop to full extension. 2) Remove front wheels and shock. 3) Place spacer “E” on the inside of the of the shock mount, placing one bracket “C”, with the notch down and facing inward, and the open end down and outwards, over the shock mount. Secure this bracket with a 10x45mm bolt and a 10mm nut that’s provided with the kit.
Rear Lift 1) Place jack under the center of the ATV not the differential and lift until the weight is off the suspension. Be careful to secure ATV properly so as not to fall off the jack. 2) Remove wheels and top of shocks. 3) Place bracket “G” behind shock mounting bar using a ¼” x ¾” Bolt and ¼” Nut. (see picture) 4) Place bracket “H” with large 1” notch facing down and outward on the OEM shock mount, placing spacer “F” on the inside of the OEM shock mount.
Note: VERY IMPORTANT After installing front and rear lift you may notice that with the shocks “unloaded”, when you first lower the jack, your front-end alignment may look out of adjustment. After assuring that everything is tight and there are no clearance problems, ride the ATV a short distance to “reload” the suspension. Check the front-end alignment.
Rear Installation (Rear View) Rear Installation (Side View) (From Right Side of ATV) Before 9 of 10 F:\Instructions\ALK300-00 Installation Instructions.
of 10 F:\Instructions\ALK300-00 Installation Instructions.