NOTES:
High Lifter Products, Inc. 780 Professional N. Dr. Shreveport, LA 71105 (318) 524-2270 Fax (318) 524-2297 Arctic Cat 400 / 500 Auto & Manual Lift Kit Installation Instructions Read before Installation This product is designed for use on ATVs on which additional ground clearance and fender clearance is desired. It is designed for utility type, slower-speed use on relatively flat terrain in deep mud or snow.
Parts List “A” – 2 “B” - 2 “D”- 2 “F” - 4 ¼” 13/16” “C” – 2 ¾” “H”–1 (Right) 5.5” “G”–2 “I” –1(Left) 5.
Arctic Cat Product Line Up Lift Kit – Generates 1.5” – 2” of additional Ground Clearance. Outlaw Tires 25x9.50x12 25x12x12 26x10x12 26x12x12 27x9.50x12 27x12x12 28x9.50x12 28x10.5x12 28x12.50x12 ITP Steel/Aluminum Wheels.
1) Place jack under center of ATV front end and lift until front wheels clear the ground. Be careful to support ATV properly so that it is secure, but so that the A-arms and shocks can droop to full extension. 2) Remove front wheels and shock. 3) Place spacer “F” on the inside of the of the shock mount, placing one bracket “C”, with the notch down and facing inward, and the open end down and outwards, over the shock mount. Secure this bracket with a 10x45mm bolt and a 10mm nut that’s provided with the kit.
Rear Lift 1) Place jack under the center of the ATV not the differential and lift until the weight is off the suspension. Be careful to secure ATV properly so as not to fall off the jack. 2) Remove wheels and shocks. 3) Remove the axle-housing bolts. (See Diagram) 4) After removing the shocks, jack the ATV up an additional 1”-2”. 5) Place spacer “F” on the inside of the shock mount. (You may have to tap the shock mount open slightly to place spacer “F” between the mount. This is a very snug fit).
Front Lift Front Left Installation (Rear View) Front Left Installation (Front View) Rear Installation (Rear View)
