Manualshelf

Owner's manual

ManualsBrandsHigh Lifter ManualsHardwareLift Kit for Can-Am 1000 Outlander and Renegade 1000 - Signature Series
12345678910
3
Front Lift Installation
1) Place ATV transmission in park. Place jack under center of ATV front end and lift until front wheels clear
the ground. Be careful to support ATV properly so that it is securely supported so that A-arms and shocks
can droop to full extension.
2) Remove front wheels.
3) Disconnect the top of the shock from the ATV.
4) Remove the inner fenders from both sides of the ATV.
5) Insert the long front lift bracket in between the shock mounting tabs, but do not connect at this time.