Manualshelf

Owner's manual

ManualsBrandsHigh Lifter ManualsHardwareLift Kit for Can-Am 1000 Outlander and Renegade 1000 - Signature Series
12345678910
7
21) Place the jam nut that was connected to the steering stem to the short end of the new tie rod.
22) Now connect the joint and jam nut that was connect to the knuckle assembly to the longest end of the new
tie rod.
23) Connect the new tie rod to the ATV.
24) Make sure to reuse the washers, castle nut, and cotter pin to connect the end to the knuckle assembly but do
not insert the cotter pin until you have checked the tow on the ATV so assemble both sides.