User guide

Front Lift Installation
1. Ensuring that the parking brake is set, place jack under center of the Mule front end and lift until front
wheels clear the ground. Be careful to support Mule properly so that it is secure, but so that the A-arms
and struts can droop to full extension.
2. Remove front wheels.
3. Remove the front plastic cap to allow access to the strut mounts.
4. Next, unbolt the top of the strut. The nuts securing the top strut can be located in the dash of the Mule
on the left and right sides.
5. Once the strut is loosen and dropped out of it mounting location, tighten 2 of the stud extenders onto the
top of the strut. Next, slide one of the lift blocks onto the top of the strut.
2