Manualshelf

Owner manual

ManualsBrandsHigh Lifter ManualsHardwareLift Kit for Polaris Mid-Size RANGER - Signature Series
123456789
4
7) You will need to remove about a ¼” of the housing. We used a grinder. Make sure to remove enough
so you do not need to go back and regrind.
8) Once you have completed the grinding, drop the small front spacer into the bottom of the strut socket
and place the large front spacer on the top of the strut over the large OE washer. Make sure to place
the large spacer with the lip on top for the spring to nest in.