Manual

2
WARNING:
Be advised that there are certain hazards of burning or scalding, that are created by installing
radiators with potentially boiling hot fluids in locations other than those selected by the ATV
manufacturer. By relocating the radiator, the customer and installer indicate that they
understand and accept all risks and liability that are or may be created by moving the vehicles
radiator to a non standard location. The purchaser and installer hereby release High Lifter and it
officers and employees from any and all potential responsibility that may arise from installation
of this radiator relocation kit. It is also the duty of the installer or purchaser to inform the rider
or next owners of these potential hazards.
Upon completion verify all hoses and wires are not touching or rubbing the plastic. Vibration
WILL rub a hole in the lines very quickly. Zip-tie all lines and hoses securely.
NOTE: When you remove your stock radiator from your ATV/UTV make sure to clean the radiator.
We recommend that you purchase Coil Cleaner from your local hardware store. The cost is about $5
to $10.00. It is used for cleaning air conditioning coils. It will help you remove a lot of the material
that prevents your radiator from working efficiently.