Instruction Manual

High Lifter Products, Inc. [phone]
780 Professional N. Drive [phone]
Shreveport, La 71105
www.highlifter.com
Team High Lifter Window Decal
Installation Instructions
1. Properly clean window area where decal will be placed.
2. Let the surface dry completely.
3. Remove the backing paper. Take care not to lift or tear the lettering.
4. Carefully center decal in the area where it is to be place.
5. Press the center of the decal onto desired area then work out to ends. This will allow the air to
escape and prevent air pockets from forming.
6. Use a flat card or credit card ,to act as a squeegee, to force air out and ensure that lettering is
securely attached to the surface of the glass.
NOTE: If air pockets form use a needle to puncture the pocket and force air out.
7. Remove the paper holding the letters in place. Take care to ensure that the letters remain on the
glass and do not come up with the paper.
NOTE: If letters do come up, lay back on the surface of the glass and take flat card and pass over
area to ensure letters sticking back to surface, then remove paper.
8. Let the decal set for 24 hours before trying to wash or clean area.