BILL COUNTER OPERATION MANUAL PRODUCT #700012
CONTENT 1) Illustration................................................... 1 2) Function Controls and Display................. 2 3) General Instruction................................... 3 4) Safety Instructions................................. 3-4 5) Power Up.................................................... 4 6) Counting Function..........................................4-5 7) Counterfeit Detection........................... 6-8 8) Error Message and Solution.................. 8-9 9) Hopper Adjustment...
ILLUSTRATION Hopper Plate Counting Guides Handle Function Console Frontal Platform Side Plastic Cover Propeller Stacker Auto-Start Sensor UV Sensor Counting Sensor Feeding Roller Counting Sensor Impeller Present Sensor Bill Thickness Adjustment Screw Power Switch Fastening Screw External Screen Jack Power Outlet 1 BILL COUNTER
FUNCTION CONTROLS AND DISPLAY g h i a - Counting Display f - “RESTART” Button b - “BATCH” Display g - “ADD” Button c - “+” Button h - “UV” Button d - ”-” Button i - “MG” Button e - “BATCH” Button BILL COUNTER 2
GENERAL INSTRUCTIONS Being the latest generation of bill counter, this model is the vanguard of our evolution in bill counting technology. Its compact and stylish design is as remarkable as its integrated electronics and multifunction capabilities. Different from other back-loading counters, it employs many detection methods which other back-loading counters do not offer. The internal structure design make this machine far superior from other counting machines.
SAFETY INSTRUCTIONS • To reduce the risk of electric shock, do not disassemble this product. Take it to qualified service personnel when service or repair work is required. Opening or removing covers may expose you to dangerous voltages or other risks and void warranty. • Do not use the unit if the power cord is damaged or if the plug socket contact is loose. Not following these instructions may result in electric shock, fire or other hazards.
COUNTING FUNCTION 2) ‘ADD’ Function The ‘ADD’ function can be performed by pressing the ‘ADD’ button. When the ‘ADD’ indicator is on, remove the counted bills from the stacker and start another batch counting. The counting display will not show number from 1 and will be added to the previous counted quantity. Press the ‘ADD’ button again to close this function. 3) ‘BATCH’ Function The ‘BATCH function can be performed by pressing the ‘BATCH’ button.
COUNTERFEIT DETECTION • UV (Ultraviolet) detection function is used to check all kinds of banknotes which contain ‘UV’ features. The ‘UV’ function is automatically turned on by default when the machine is powered up. It can also be selected or deselected by pressing the ‘UV’ button located in the function console.
ADDITIONAL FUNCTIONS 1. Chain Notes Detection Serving as a supplementary function, the chain-note detection can be activated when the unit is powered up. If the machine detects a chain-note during counting, it will stop and emit a beeping sound and the counting display will show the message ‘E-9’ (alerting the user to the presence of a chain-note bill). Remove the bill and press ‘RESTART’ to continue counting. PLEASE NOTE: The suspicious bill will be added to the counted quantity. 2.
ERROR MESSAGE AND SOLUTION The ‘BATCH’ display may show some error message when counting, which means there are some problems with the machine or the presence of a suspicious bill. Refer to the following diagram for solutions: Generally speaking most errors mentioned below may be caused by dust or dirt inside of the machine. Keeping the machine clean is highly recommended.
HOPPER ADJUSTMENT When improper feeding of bills occur, adjust the bill thickness in the hopper by turning the bill adjustment screw located in the back of the machine to ensure proper feeding.
MAINTENANCE • Do not operate the unit in areas with high temperatures or high humidity since it may cause the machine to stop working or prevent it from counting accurately. • When not using the unit for a long period of time, remove the power plug from the wall outlet. • Never operate the unit under strong light. • Clean the machine frequently after switching off and unplug it. • Do not use this product in areas where it may be exposed to water or other liquids.