Instructions / Assembly
______________________________________________________________________________________________________________________________________
2 www.hightechpet.com High Tech Pet Products, Inc.
ALL NEW DESIGN!
After selling thousands of our original POWER PET, PP models we are very pleased to introduce our All New,
completely redesigned and restyled PX Model. We listened to the feedback of hundreds of customers and
threw in a few ingenious, new ideas of our own to bring you the ultimate combination of security, style and con-
venient features.
The PX model, which features an extremely slim design, is less than 2 inches deep. This allows it to be
mounted ush to your door or wall. You cut a hole only as large as the door panel itself, then mount your
POWER PET door in front of the opening. You will nd it is actually easier to install a POWER PET door than a
conventional pet door and certainly easier than installing a “between the studs type door”
The PX is constructed of an ultra-high strength ABS composite housing with a bullet-proof Lexan plastic door
panel, giving you and your pet the ultimate in security. The Lexan panel is mounted on a sliding, air-tight seal
for the best wind, rain and foul weather protection of any pet door made.
This new, absolutely state of the art design represents unquestionably the most advanced, most reliable, most
stylish pet door made anywhere. In fact, your new POWER PET Fully Automatic Pet Door will be the most
sophisti cated appliance your pet will ever own!
Your POWER PET door package includes:
• One Pet Transmitter Collar (Model MS2 Standard Ultrasonic Transmitter Collar)
• 110 volt AC Adapter (connects to either Power Input Jack on edge of inside frame)
• Pre-Fabricated Outside Frame
• All Required Hardware
(Wall Adapter Tunnel, Rechargeable Battery, Battery Charger Kit and Extra Transmitter Collars are sold separately.)
PET COLLAR OPERATED
Only the amazing POWER PET door uses our Patented directional
ultrasonic sensing system. This system has great advantages over
magnetic or radio transmitter collars.
Magnetic collars have a very limited range making it tough to train the
pet to operate the door. Radio systems have good range but open
whenever the animal is within that range, even if the pet is sitting,
sleeping or just wandering by.
The Power Pet’s directional ultrasonic system overcomes these prob-
lems. The Pet worn ultrasonic collar emits a highly directional signal,
which is received by the microphone only when your pet is directly
facing the door opening. The unit is not likely to trigger if your pet is
just wandering by.
Typically the ultrasonic signal is bounced off the ground in the direction
which your pet is facing. This means that surfaces which are highly
reective such as tile and linoleum will result in a longer working range
than acoustically absorbent surfaces such as carpeting.
INSTALLATION
MOUNTING YOUR POWER PET DOOR
Your POWER PET door mounts ush to any door or wall. The hardest part of installing the POWER PET door is cutting
the hole. If the unit is to be mounted in a door up to 1 ¾“ thick there is no framing necessary. The pre-made Outer Frame
that came with your POWER PET door will provide a nished look to the opening. If you are installing your POWER PET
door in a wall, it is advisable to build a frame around the opening or order our convenient WALL ADAPTER TUNNEL. The
hole dimensions given are for the nished opening not including the frame. Dimensions of the frame you build should be
added to the opening size to determine the nal size of the hole you cut in your wall.
Directional
Signal
Microphone
Ultrasonic
Collar