User Manual

___________________________________________________________________________________________
High Tech Pet Products, Inc. www.hightechpet.com 9
is enough to insure that the installation is secure. Should your door
panel malfunction during the initial power up, loosen each mounting
screw and re-test.
b) Note that screw covers (not pictured) are provided to nish the screw
holes. Once installed, the inside screw covers may be removed by
twisting CLOCKWISE using a coin or at head screwdriver. Twisting
counter-clockwise will cause the screw covers to break.
Initial Power up
Plug the AC Adaptor into a nearby 110 VAC wall outlet. Plug adaptor cord
into the left or right Power Input Jack on the inside frame. (see page 3)
Press the front panel ON button to power up the door. Verify the AC
light is illuminated.
Press the manual OPEN button and verify the door panel opens and
closes by itself.
AC and Battery Operation
(In Battery Back Up Mode the
Door Automatically Switches
to Battery if AC Power Is Lost.)
Manual Open Button
Automatic Battery
Power Monitoring
Dual Range Controls
For Independant Control of
Inside and Outside Distance
4 Way Access Control
 In and Out
 In Only
 Out Only
 Closed