Data Sheet

3
INSTRUCTIONS
1. Install Battery – Open the battery compartment
(see diagram for location) pushing on the tab
where indicated, to release cover. Insert a 9 volt
battery with the metal connections of the battery
against the metal receivers in the battery com-
partment. Close the cover, inserting the tabs and
pushing down to snap closed.
2. Place the Radio Mat in a pet-restricted area.
3. Test – Turn the Sound Output Switch ON, and
press your hand or foot on the pad. Conrm the
Sonic Alarm is heard.
4. Set the Sound Output Switch and Radio Output
Switch as desired. (See Controls instructions
above.)
Using Radio Mat With a Humane
Contain™ Collar
Reminder: If your pet is small or has very short
fur, unscrew the large probes from collar and
replace with small probes included in the collar
kit.