Eucalyptus Rocker Made in Vietnam Eucalyptus Rocker Page 1 of 6
Pre-Assembly Instructions Read all instructions carefully before assembly. Find a smooth clean area in which to work to avoid damaging your item. Check that all parts and hardware from the lists are present.
Step 1 : Use two Long Screws (1) to attach a Rocker (C) to the Right Side (A). Repeat with the Left Side (B) Note: Insert fasteners only half-way until all parts have been assembled Item Drawing Qty 1 4 Step 2: Use the Short Bolt (2), Long Bolt (3), Nut (4) and Hex Wrench (7) to loosely attach the Seat (D) to Left Leg (A).
Eucalyptus Rocker Page 4 of 6
Step 5: Use the 35mm long Screws (6) to secure the support rail on the Sides to the Seat. Use the Hex Wrench (7) to fully tighten all Bolts and Screws. Post-Assembly Instructions: Periodically check fasteners to be sure they do not loosen over time. Do not stand on this item. Outdoor Furniture Care Instruction: With the proper care your premium eucalyptus furniture will last up to 25 years or more.