Installation & Assembly

Step 6
Inspect the Armchair and make sure all parts are adequately connected.
In a sequential manner, tighten all Screws at all joints.
With assistance from your adult partners, adjust the Levellers to desired height to avoid wobbles.
Attach the Seat Panel (D) onto the Armchair as shown in picture above.
Affix Seat Panel (D) with Armchair by using Short Screws (
) and Allen Key (
).
Note: Using Short Screws (
) from inside to outside of Seat Panel (D)
DO NOT FULLY TIGHTHEN SCREWS.
Step 5
Step 7
Turn the chair right side up.
Place Seat Cushion (G), Back Cushion (H) to Seat Panel (D).
Inspect it and make sure all parts are adequately connected.
Ensure all screws, bolts are fully locked into position and secured.
The Armchair is ready to be used.
Caution: This Armchair can only be used on a flat, level surface.
H
G
Adjust Pre-installed Levellers
height for balance