User`s guide

Hardware – Description and Installation

Port1-4 - These represent the RocketRAID 3530/3540’s Internal Mini-SAS ports. Each

port can support up to 4 SATA hard disks. The RR3530 is 3 ports, and can support up

to 12 disks. The RR3540 is 4 ports, and can support up to 16 hard disks.

BEEP1 – (alarm/speaker): the speaker emits and audible alarm in the case of disk/array

failure.

A1-A4/F1-F4 – LED connections. “A” refers to the disk activity connectors, and

those marked “F” function as disk failure connectors

Note: The RocketRAID 3530 supports 12 disks, and only provides 3 LED connectors

for each function (A1-A3 ,F1-F3).

J17 - This jumper can be used to enable or disable the card’s alarm (BEEP1). The

alarm is enabled by default (the jumper is attached). To disable the alarm, remove the

jumper

J4 - This jumper supports SAF-TE interface (I2C).

J18 (BBU connector) - Connector for battery backup unit (optional part).

Ethernet Port - Ethernet port (U32) for Out of Band Management, support Net Time

Protocol.