Instructions / Assembly

For information on Care and Cleaning or to register your

highwood product, please visit www.highwood-usa.com.

PAGE 1 OF 2

INCLUDED TOOLS

5/32" HEX KEY

IMPORTANT!

DO NOT fully tighten the bolts until all

bolts are started. Once all bolts are inserted,

go back & tighten all the bolts.

Retain these instructions for future reference

HARDWARE

T-15 TORX BIT

high

wood

NATURE'S CLOSEST RIVAL



CUSTOMER-SUPPLIED TOOLS

Cordless screwdriver/drill OR

Multi-bit handle for the Torx bit.

Adirondack Collection

Manhatten Adirondack Chair

Assembly Guide

1) Attach Seat to Back using bolt C.

2) Repeat on other side.

ADRID129A/B

07.05.2017

3) Attach Back Support Brace (shorter piece)

to Back Support Sides with four A screws.

1/4"-20 x 3"

#7 x 1-5/8"

1/4"-20 x 2"

BACK

SEAT

PAGE 1
HARDWARE Adirondack Collection Manhatten Adirondack Chair A x8 #7 x 1-5/8" Assembly Guide B x2 1/4"-20 x 2" x4 C BACK 1/4"-20 x 3" IMPORTANT! C DO NOT fully tighten the bolts until all bolts are started. Once all bolts are inserted, go back & tighten all the bolts. SEAT Retain these instructions for future reference INCLUDED TOOLS 1) Attach Seat to Back using bolt C. 2) Repeat on other side.
PAGE 2
Adirondack Collection LEG Manhatten Adirondack Chair Assembly Guide Washer between Leg and Seat BACK B SEAT ARM C 6) Turn chair over. Towards front of Seat, attach Seat to Leg using bolt B. 7) Repeat on other side. Board Faces Out (From Step 3) SEAT 4) Insert bolt C from the Arm, through the Back Support Side, and into the Back. 5) Repeat on other side. IMPORTANT NOTE! NEVER adjust the level of recline while you are sitting in the chair, or while anyone else is in the chair.