Instructions / Assembly

For information on Care and Cleaning or to register your

highwood product, please visit www.highwood-usa.com.

PAGE 1 OF 2

INCLUDED TOOLS

5/32" HEX KEY

IMPORTANT!

DO NOT fully tighten the bolts until all

bolts are started. Once all bolts are inserted,

go back & tighten all the bolts.

Retain these instructions for future reference

HARDWARE

high

wood

NATURE'S CLOSEST RIVAL



Adirondack Collection

Classic Westport Rocking Chair

Assembly Guide

1) With the Back and Seat on Their

Sides, Attach One Side of the Back

to the Seat Using Two "A" Bolts.

2) Repeat on Other Side.

ROCCW30

03.17.2017

x 10

1/4"-20 X 1-3/4"

1/4"-20 X 2"

x 6

SEAT

BACK

PAGE 1
Adirondack Collection HARDWARE Classic Westport Rocking Chair A Assembly Guide x 10 1/4"-20 X 1-3/4" A B x6 1/4"-20 X 2" IMPORTANT! DO NOT fully tighten the bolts until all bolts are started. Once all bolts are inserted, go back & tighten all the bolts. Retain these instructions for future reference BACK INCLUDED TOOLS SEAT 5/32" HEX KEY 1) With the Back and Seat on Their Sides, Attach One Side of the Back to the Seat Using Two "A" Bolts.
PAGE 2
Adirondack Collection Classic Westport Rocking Chair Assembly Guide SEAT BACK ARM ASSEMBLY A B INSERTS FACING TOWARD SEAT AS SHOWN LEG ASSEMBLY A LEG ASSEMBLY BACK B 3) Attach Front of Leg Assembly to Seat Using Two "A" Bolts as Shown Above. Attach Back of Leg Assembly to Seat Using Two "B" Bolts as Shown Below. BACK 4)Repeat on Other Side. LEG ASSEMBLY 5) Attach Arm Assembly to Leg Using One "B" Bolt. Attach Arm Assembly to Back Using One "A" Bolt. 6) Repeat on Other Side.