User Manual

Camera Wiring (Optional):
1. Power cable: red and black.
Red - positive reversing light
Black - negative reversing light
2. RCA cable: yellow port. insert it into the port '' CAM-IN '' (yellow) of the radio
3. Make sure the ''parking sensor control wire'' on the radio's power cord is connected to
the reversing light positive wire.
After connection, when you are parking, the device will display the rear view image
automatically and when the parking is over, you will return to the radio page.
Note 1: The short red wires next to the RCA port do not need to be connected to
anything in this wiring.
Note 2: when the device is in parking mode, other functions will stop working temporarily.
How to confirm if the camera is good?
For 4 LED light rear camera, after connect the power cables of the camera, if the LED light
is on, the camera is good.
For 8/12 IR light rear camera, after connect the power cables of the camera, cover the
lens by your hand and see inside, if the red IR light is on, the camera is good.