User Manual

Here's the complete steps of camera wiring. Please check step by step.
1. Camera power cable: red and black.
--- Red connection to reverse the positive light, black to reverse the negative light.
2. Camera RCA cable: yellow port.
---- Insert the RCA cable of the camera on the radio rear port "CAMIN" (for Android
car radio, it's a single cable with yellow port with label "rear camera/reverse/back")
3. Trigger Cable
3.1 the trigger cable on car radio: the cable with label named "REVERSE/BACK"
There are two short red wires next to the camera's RCA port.
3.2 near the radio: the red wire 1 -- connects to 3.1 cable
3.3 near the camera: the red wire 2 -- connects to car's rear light positive.
When you pull the rear gear, the device will automatically display the rear view
image.