User Manual
Table Of Contents
*Please read the follow notice before installation*
1. Please make sure that you or the professional are using our original connector in your
first installation, otherwise it may cause short circus on the radio because the cable order
is not correctly match. If you use other connector, the radio may not turned on or make
any sound, even when you use our original connector for the second try. Any damage
caused by the mis-used wiring will not be included in warranty term.
2. After you install the radio, you may see some regular problems that most buvers may
see, but most of which could be checked and resolved by the "trouble shooting"
SPECIFICATIONS
FM TUNER
Frequency Range 87.5-108.0MHz
Sensitivity 10 dBu
I.F. Frequency 10.7MHz
Frequency Response 80Hz-12kHz (±3dB)
Stereo Separation >25dB
S/N Ratio >50dB
GENERAL
Power Supply 12 V DC, Negative Ground
VoltageMax Current 15 A
Max Output Consumption Power 4x45W
Note:
Specifications and the design are subject to possible modification without notice due to
improvement