User's Manual

Acoustic Leak Detector User Manual
6
2.2 Power On/Off
2.2.1 Power On
Note
Please fully charge the device before you start for the first time.
Press to turn on the device. You can detect the leaks when the
interface of the device is stable.
2.2.2 Power Off
Manual: When the device is turned on, hold for about three seconds
to power off the device.
Set Auto Power-off Duration
：
Steps
1
，
Go to Local Settings → Device Settings → Auto Off
2
，
Press to set the automatic shutdown time for device as required.
2.3 Standby Mode
When the device is not in use, you can enable the standby mode for the
power saving.
2.3.1 Enable the Standby Mode
Manual: When the device is turned on, press to enable the standby
mode.
Set Auto Power-off Duration
：
Steps
1. Go to Local Settings → Device Settings → Auto Sleep
2. Press to set the automatic shutdown time for device as required.