User's Manual

Acoustic Leak Detector User Manual
9
Chapter 4 Operation Method
The acoustic leak detector can detect the leakage points by inspection
and quick inspection.
4.1 Quick Inspection
You can detect the single leakage point quickly by collecting its audio
amplitude.
Hearing Protection
：when the device receive the
：
Amplitude display including the line chart, bar chart and
the figure.
: Adjust the corresponding level according to the frequency
range including Indoor I
，
Indoor II, Outdoor I, Outdoor II.
4.2 Inspection
You can tell the leakage points by collecting the audio amplitudes in the
12 points at the same time.
Collect amplitude in points
Tap one of the points and tap again when the amplitude is stable. Then
the average amplitude will be displayed on the top of the corresponding
point.
Note
● You can collect the data again in the same point.
Clear
Clear all the data in 12 points.
Analyze