User's Manual

Chapter 2 Preparaon
2.1 Charge Device
Cauon
The built-in cell baery
that powers the real me clock (RTC) of the device may drain during
longme transportaon or storage. It is recommended to recharge the RTC baery for the well-
funconing of the device clock.
To fully charge the RTC baery, the following requirements should be met:
●
The rechargeable lithium baeries should be installed on the device.
●
The device should keep working for more than 10 hours before shung down.
2.1.1 Charge Device via Cable Interface
Before You Start
Please mak
e sure the baery is installed before charging.
Steps
1. Open the top cover of the device.
2. Connect the interface and the power adaptor with Type-C or USB cable.
2.1.2 Charge Device via Charging Base
Steps
Note
Please charge the device with the cable and power adapter supplied by the manufacturer (or
acc
ording to the input voltage from the specicaons).
1. Hold the de
vice, and press both baery lock catches of the device.
Handheld Thermal Camera G Series User Manual
4