User's Manual

Cauon
Disable connuous autofocus mode when the device is moving, or it may aect the device
funcon.
Go to Sengs → Cap
ture Sengs → Focus → Focus Mode to enable Connuous Autofocus.
Then aim the device at the target, and the device focuses automacally.
Note
Focus ring adjustment does not take eect in this mode.
3.2 Set Screen Brightness
Devices support auto or manual screen brightness adjustment.
Table 3-1 Screen Brightness Adjustment
Method Operaon
Manual Go to Sengs → De
vice Sengs → Brightness to adjust the screen
brightness.
Auto Go to Sengs → Device Sengs → Brightness to enable Auto.
Devices adjust the screen brightness automacally when the ambient
brightness changes.
Note
The auto screen brightness adjustment funcon is only supported by devices with light sensors.
Please t
ake the actual device for reference.
3.3 Set Display Mode
You can set the thermal/opcal view of the device. Thermal, Fusion, PIP, and Opcal are
select
able.
Steps
1. Select
from the main menu.
2. Tap on the icons to select a view mode.
In thermal mode, the device displays the thermal view.
Handheld Thermal Camera G Series User Manual
16