User's Manual

In fusion mode, the device displays the combined view of thermal channel and opcal
channel.
In PiP (Picture in Picture) mode, the device displays thermal view inside the opcal view.
Note
You can press and to set the PiP proporon. Or go to Loc
al Sengs → Image Sengs →
PIP Proporon to set the value.
In opcal mode, the device displays the opcal view.
3. Pr
ess
to exit.
3.4 Set Palees
The
palees allow you to select the desired colors.
Steps
1. Select
from the main menu.
2. T
ap on the icons to select a palee type.
White Hot
The hot part is light-colored in view.
Black Hot
The hot part is black-colored in view.
Rainbow
The target displays mulple colors, it is suitable for scene without obvious temperature
dierence.
Ironbow
The t
arget is colored as heated iron.
Red Hot
The hot part is red-colored in view.
Fusion
The hot part is yellow-colored and the cold part is purple-colored in view.
Rain
The hot part in the image are colored, and the else is blue.
3. Press
to exit the seng interface.
Note
You can also press on the live view interface to change the palees.
Handheld Thermal Camera G Series User Manual
17