User's Manual

Table 3-3 Icon Descripon
Icon Palees Mode Descripon
Above Focus Set the temperature threshold, and the targets with
the temperature higher than the set value are
displayed with fusion palees.
Below Focus Set the temperature threshold, and targets with the
t
emperature lower than the set value are displayed
with fusion palees.
Interval Focus Set the temperature range (e.g., 90 °C to 150 °C), and
t
argets in the range are displayed with fusion
palees.
3. Oponal: Pr
ess
and to select between upper limit and lower limit.
4. Pr
ess
and to adjust the rule temperature.
5. Pr
ess
to exit.
3.5 Adjust Digital Zoom
In the live view interface, press to adjust the digital zoom to 1×, 2×, 4×, or 8×. Then you can
vie
w the target or scene in larger size.
3.6 Display OSD Info
Go to Sengs → Image Sengs → Display Sengs to enable the informaon on-screen display.
Status Icon
The device status icons, for example, baery status, memory card, hotspot, etc.
Time
De
vice me and date.
Parameters
Thermography parameters, for example, target emissivity, temperature unit, etc.
Distance Value
Laser-measured target distance.
Note
It is only supported by device models with laser distance measuring funcon.
Brand Logo
The br
and logo is a manufacturer logo displayed on the upper right corner of the screen. You
can turn it o if not needed.
Handheld Thermal Camera G Series User Manual
19