User's Manual

Set temperature of the external opcal material (e.g.: germanium window).
3. Return to previous menu to save the sengs.
Note
You can go to Loc
al Sengs → Device Sengs → Device Inializaon → Measurement Tool
Inializaon to inialize the temperature measurement parameters.
4.1.1 Set Unit
Go to Loc
al Sengs → Device Sengs → Unit to set the temperature unit and distance unit.
Note
You can go to Loc
al Sengs → Image Sengs → Display Sengs to enable/disable the
temperature display.
4.2 Adjust Display Temperature Range
Set a temperature secon and the palee only works for targets within the temperature secon.
You can adjust the temperature range.
St
eps
1. Select Level & Span
from the main menu.
2. Select Aut
o
or Manual .
Auto
Adjus
tment
Select
, and press . The device adjusts display temperature range
acc
ording to the actual targets temperature automacally.
Manual
Adjus
tment
Select
, and press .
Ther
e are 2 ways to adjust the range in this mode:
●
Adjust the display temperature range based on a selected area.
Tap on an interest area of the screen. A circle is displayed around the area,
and the palees readjusts to a temperature range to show as many details
of the area as possible.
●
Set the upper and lower limits of the temperature range manually.
a. Press
or to select the upper limit, lower limit, or both. You can also
t
ap on the temperature boxes at the ends of the palee bar to select
them.
b. Press
or adjust the temperature value. You can also tap on the
arr
ows on the right side of the screen to adjust the temperature value.
3. Press
to exit.
Handheld Thermal Camera G Series User Manual
21