User's Manual

Steps
1. Select .
2. Press .
3. Move the point with the navigaon
buons or tap on the touch-screen to select a point.
4. Press
.
The temperature of custom point (e.g. P1) displays P1: XX.
5. Repeat step 1 to 3 to set other custom points.
Note
At most ten custom points supported.
4.3.2 Set Line Rule
Steps
1. Select .
2. Pr
ess
to generate a default line.
3. Mo
ve the line to the required posion.
-
Tap the line, and press
, , , and to move the line up/down/le/right.
-
T
ap the line on touch-screen and drag it to the required posion.
4. Adjust the length of the line.
-
Tap the end of the line, and press
, , to extend or shorten the line.
-
T
ap and drag the end of the line to extend or shorten it.
5. Oponal: T
ap the line to set the Emissivity and Distance for the rule.
6. Press
.
Note
Only one line is supported.
The maximum temperature, minimum temperature, and average temperature of the line display
in the t
op le corner of the screen. The real-me temperature trend chart will display near the
line.
What to do next
Displayed temperature types for the rule are congurable at Loc
al Sengs → Thermography
Sengs → T
emperature Display .
4.3.3 Set Area Rule
Steps
1. Select
.
2. Pr
ess
to generate a default frame.
3. Press , , , and to move the frame up/down/le/right.
Handheld Thermal Camera G Series User Manual
23