User's Manual

4. Press to enlarge the frame, and press to contract the frame. Or you can drag the corner of
the frame on touch-screen to enlarge or contract the frame.
5. Press .
The maximum temperature, minimum temperature, and average temperature of the framed
area are displayed on the le of the screen.
6. Repeat steps to set other areas.
Note
At most three areas are supported.
What to do next
Displa
yed temperature types for the rule are congurable at Local Sengs → Thermography
Sengs → Temperature Display .
4.3.4 Delete Rules
Delete All Rules
Tap
and press to clear all temperature rules.
Delete One Rule
●
In the rule seng mode, tap and choose the single rule you want to delete.
●
In the observaon interface, tap on a rule (point, line or frame) and enter the eding mode. Tap
Dele
te to delete the rule.
4.4 Calculate Area Size
The device can calculate the target size in the area, and display the result over the frame.
Steps
1. Go to Local Sengs → De
vice Sengs → Area Size Calculaon .
2. Enable Area Size Calculaon.
3. In the live view interface, aim a frame at the target and press the laser buon.
Note
●
The fr
ame is the one that you draw in thermography frame rule. See
Set Area Rule f
or
instrucons.
●
Make sure the lens is parallel to the target when measuring the area size.
The target size is displayed over the frame.
Handheld Thermal Camera G Series User Manual
24