User's Manual

Chapter 6 Picture and Video
Insert memory card into the device, then you can record videos, capture snapshots, and mark and
save important data.
Note
●
De
vice does not support capturing or recording when the menu is shown.
●
When the device is connected to your PC, it does not support capturing or recording.
●
Go to Local Sengs → Device Sengs → Filename Header , you can set the lename header
for capturing or recording to disnguish the les recorded in a specify scene.
●
Go to Local Sengs → Device Sengs → Device Inializaon to inialize the memory card is
needed.
6.1 Capture Picture
Before You Start
●
A memor
y card should be mounted for picture storage.
●
Disable QR Code funcon
rst.
●
Go to Local Sengs → Capture Sengs → Flashlight to enable ashlight in dark environment.
Steps
1. Go to Local Sengs → Cap
ture Sengs .
2. Select Photo Sengs to set the capture mode.
Single Capture Capture one picture for one me.
Connuous Capture Capture mulple pictures for one me. You can set the amount of
pictur
es.
Timed Capture Device captures one picture aer the
specied me interval. You can
set the me interval as needed.
3. Oponal: Turn on Super Resoluon if you need to export the captured thermal images and view
them on a screen whose resoluon is higher than the device.
The super resoluon will be 4 mes that of the original thermal image.
4. Oponal: Se
t Visible Image Resoluon for the captured opcal image as needed.
5. Press to exit.
6. In the live view interface, pull the trigger to capture snapshot.
7. The live view freezes and device displays the capture eding interface.
1) Tap to add text remarks. Tap the screen to show the keypad interface, enter the comment
and conrm.
2) Tap to add voice remarks. Hold to start recording and release the buon to stop
r
ecording.
3) Tap
to add thermography rules. Refer to Set Temperature Measurement Rule f
or details.
Handheld Thermal Camera G Series User Manual
31