User's Manual
Table Of Contents
- Legal Information
- Regulatory Information
- Symbol Conventions
- Safety Instruction
- Chapter 1 Overview
- Chapter 2 Preparation
- Chapter 3 Display Settings
- Chapter 4 Temperature Measurement
- Chapter 5 Route Inspection
- Chapter 6 Picture and Video
- Chapter 7 Distance Detection
- Chapter 8 Geographic Location Display
- Chapter 9 Direction Display
- Chapter 10 Connect Bluetooth
- Chapter 11 Set LED Light
- Chapter 12 Cast Device Screen to PC
- Chapter 13 Connect Device to Wi-Fi
- Chapter 14 Set Device Hotspot
- Chapter 15 Thermal View Mobile Client Connection
- Chapter 16 Image Local Output
- Chapter 17 Maintenance
- Chapter 18 Appendix
Table 6-1 File Type and Descripon
File Type Descripon
Radiometric videos,
format .rv
Radiometric videos clips are not supported playing on the device.
To display these videos, you should export the videos to HIKMICRO
Analyzer for display and analysis.
MP4 videos, format .mp4 Videos of this format can be played on local device, or exported to
pla
y by any other supported player.
But, this format can not be played by HIKMICRO Analyzer
Radiometric images,
format .jpeg
Images can be viewed on local device, or exported and analyzed in
HIKMICRO Analyzer.
Note
●
Files ar
e arranged in chronological order, with the most recent at the top. If you fails to nd
the most recently taken snapshots or videos, please check the me and date sengs of your
device. See
Set Date and Time f
or instrucons.
●
When you are viewing les, you can switch to other les by tapping
or .
●
When y
ou are viewing snapshots with voice notes, You can tap
to play the sound. If you
w
ant to listen to the recorded sound in MP4 videos or with snapshots by bluetooth earphones
or speakers, refer to
Connect Bluetooth f
or instrucons.
●
For le exporng, see
Export Files f
or instrucons.
●
For le analysis, download HIKMICRO Analyzer from our website
hps://
www.hikmicrotech.com/ .
6.5 Export Files
Connect the device to your PC with supplied cable, you can export the recorded videos and
c
aptured snapshots.
Note
Cast screen should be turned o before exporng les. Go to Loc
al Sengs → Device Sengs →
Cast Screen to check the funcon status.
Steps
1. Open the c
over of cable interface.
2. Connect the device to your PC with cable and open the detected disk.
3. Select and copy the videos or snapshots to PC to view the les.
4. Disconnect the device from your PC.
Note
For the rst
me connecon, the driver will be installed automacally.
Handheld Thermal Camera G Series User Manual
34