User's Manual

ManualsBrandsHIKMICRO ManualsCamera & PhotoHandheld Thermography Camera

Table Of Contents

Legal Information
Regulatory Information
Symbol Conventions
Safety Instruction
Chapter 1 Overview
- 1.1 Device Description
- 1.2 Main Function
- 1.3 Appearance
Chapter 2 Preparation
- 2.1 Charge Device
  - 2.1.1 Charge Device via Cable Interface
  - 2.1.2 Charge Device via Charging Base
- 2.2 Mount Hand Strap
- 2.3 Mount Protective Cover
- 2.4 (Optional) Mount Interchangeable Lens
  - 2.4.1 Calibrate Interchangeable Lens
- 2.5 Power On/Off
  - 2.5.1 Set Auto Power-off Duration
- 2.6 Operation Method
- 2.7 Menu Description
Chapter 3 Display Settings
- 3.1 Focus
- 3.2 Set Screen Brightness
- 3.3 Set Display Mode
- 3.4 Set Palettes
  - 3.4.1 Set Alarm Mode Palettes
  - 3.4.2 Set Focus Mode Palettes
- 3.5 Adjust Digital Zoom
- 3.6 Display OSD Info
Chapter 4 Temperature Measurement
- 4.1 Set Thermography Parameters
  - 4.1.1 Set Unit
- 4.2 Adjust Display Temperature Range
- 4.3 Set Temperature Measurement Rule
- 4.4 Calculate Area Size
- 4.5 Temperature Alarm
  - 4.5.1 Set Alarms for Exceptional Temperatures
Chapter 5 Route Inspection
- 5.1 Create Inspection Route and Send Task to Device
- 5.2 Perform Route Inspection
- 5.3 Upload Inspection Result and View Report
Chapter 6 Picture and Video
- 6.1 Capture Picture
- 6.2 Scan QR Code
- 6.3 Record Video
- 6.4 View Local Files
- 6.5 Export Files
Chapter 7 Distance Detection
Chapter 8 Geographic Location Display
Chapter 9 Direction Display
- 9.1 Calibrate Compass
- 9.2 Magnetic Declination Correction
Chapter 10 Connect Bluetooth
Chapter 11 Set LED Light
Chapter 12 Cast Device Screen to PC
Chapter 13 Connect Device to Wi-Fi
Chapter 14 Set Device Hotspot
Chapter 15 Thermal View Mobile Client Connection
- 15.1 Connect via Wi-Fi
- 15.2 Connect via Hot Spot
Chapter 16 Image Local Output
Chapter 17 Maintenance
- 17.1 View Device Information
- 17.2 Set Date and Time
- 17.3 Upgrade Device
- 17.4 Restore Device
- 17.5 Initialize Memory Card
- 17.6 About Calibration
Chapter 18 Appendix
- 18.1 Common Material Emissivity Reference
- 18.2 FAQ
- 18.3 Device Command
- 18.4 Device Communication Matrix

Chapter 13 Connect Device to Wi-Fi

Steps

1. Go to Sengs → Device Sengs → WLAN .

2. Tap to enable Wi-Fi, and the searched Wi-Fi will be listed as below.

Figure 13-1 Wi-Fi List

3. Select Wi-Fi and en

ter password.

Note

DO NOT tap en

ter or space, or the password may be incorrect.

4. T

ap Close to hide the keypad.

5. Tap OK.

Note

It takes about 1 minute at most to connect the device to the selected Wi-Fi. Leaving the Wi-Fi

seng page does not interrupt the connecon.

Result

A Wi-Fi ic

on shows on the main interface when the connecon is completed.

Handheld Thermal Camera G Series User Manual