User's Manual

Chapter 16 Image Local Output
You can view the image on the display unit for details with this funcon.
Before You Start
●
This funcon is only supported by the models with CVBS out interface or micro HDMI output
interface.
●
If your device has a micro HDMI output interface, connect the device and a display unit to cast
the image. No more sengs are required.
●
If your device has CVBS out interface, connect the device and the display unit via a CVBS cable,
and set the device according to the steps below.
●
Make sure the device is turned o when connecng the cable.
Steps
1. Go to Local Sengs → Image Sengs → CVBS Output .
2. Tap to enable CVBS output.
3. Press to save and exit.
The display unit show the device image.
Handheld Thermal Camera G Series User Manual
46