User's Manual

Chapter 17 Maintenance
17.1 View Device Informaon
Go to Local Sengs → Device Informaon to view the device informaon.
17.2 Set Date and Time
Steps
1. Go to Local Sengs → Device Sengs → Time and Date .
2. Set the date and me.
3. Press to save and exit.
Note
Go to Loc
al Sengs → Image Sengs → Display Sengs to enable or disable me and date
display.
17.3 Upgrade Device
Steps
1. Connect the de
vice to your PC with cable and open the detected disk.
2. Copy the upgrade le and paste it to the root directory of the device.
3. Disc
onnect the device from your PC.
4. Reboot the device and then it will upgrade automacally. The upgrading process will be
displayed in the main interface.
Note
Aer upgrading, the device reboots automacally. You can view the current version in Loc
al
Sengs → Device Informaon .
17.4 Restore Device
Go to Loc
al Sengs → Device Sengs → Device Inializaon to inialize the device and restore
default sengs.
17.5 Inialize Memory Card
When a memory card is use on the handheld thermal camera for the rst me, it needs to be
inialized rst.
Handheld Thermal Camera G Series User Manual
47