User's Manual
Table Of Contents
- Legal Information
- Regulatory Information
- Symbol Conventions
- Safety Instruction
- Chapter 1 Overview
- Chapter 2 Preparation
- Chapter 3 Display Settings
- Chapter 4 Temperature Measurement
- Chapter 5 Route Inspection
- Chapter 6 Picture and Video
- Chapter 7 Distance Detection
- Chapter 8 Geographic Location Display
- Chapter 9 Direction Display
- Chapter 10 Connect Bluetooth
- Chapter 11 Set LED Light
- Chapter 12 Cast Device Screen to PC
- Chapter 13 Connect Device to Wi-Fi
- Chapter 14 Set Device Hotspot
- Chapter 15 Thermal View Mobile Client Connection
- Chapter 16 Image Local Output
- Chapter 17 Maintenance
- Chapter 18 Appendix
Safety Instrucon
These instrucons are intended to ensure that user can use the product correctly to avoid danger
or property loss.
Laws and Regulaons
●
Use of the product must be in strict compliance with the local electrical safety regulaons.
Transportaon
●
Keep the device in original or similar packaging while transporng it.
●
Keep all wrappers aer unpacking them for future use. In case of any failure occurred, you need
to return the device to the factory with the original wrapper. Transportaon without the original
wrapper may result in damage on the device and the company shall not take any responsibilies.
●
DO NOT drop the product or subject it to physical shock. Keep the device away from magnec
interference.
Power Supply
●
Input voltage for device should meet the Limited Power Source (5 VDC, 940 mA) according to the
IEC61010-1 standard. Please refer to technical specicaons for detailed informaon.
●
Make sure the plug is properly connected to the power socket.
●
DO NOT connect mulple devices to one power adapter, to avoid over-heang or
re hazards
caused by overload.
Baery
●
Improper use or replacement of the baery may result in explosion hazard. Replace with the
same or equivalent type only. Dispose of used baeries in conformance with the instrucons
provided by the baery manufacturer.
●
The built
-in baery cannot be dismantled. Please contact the manufacture for repair if
necessary.
●
For long-term storage of the baery, make sure it is fully charged every half year to ensure the
baery
quality. Otherwise, damage may occur.
●
DO NOT charge other baery types with the supplied charger. Conrm there is no ammable
material within 2 m of the charger during charging.
●
DO NOT place the baery near heang or re source. Avoid direct sunlight.
●
DO NOT swallow the baery to avoid chemical burns.
●
DO NOT place the baery in the reach of children.
●
When the de
vice is powered o and the RTC baery is full, the me sengs can be kept for 15
days.
●
In the rst use, power on the device and charge the RTC baery with the lithium baery for
more than 10 hours.
Handheld Thermal Camera G Series User Manual
viii