User's Manual

Handheld Thermography Camera User Manual

Note

Chapter 9 Maintenance

9.1 View Device Information

Go to Local Settings → Device Information to view the device information.

9.2 Set Date and Time

Steps

1. Go to Local Settings → Device Settings → Time and Date.

2. Set the date and time.

3. Press to save and exit.

Go to Local Settings → Image Settings → Display Settings to enable or disable time and date

display.

9.3 Upgrade Device

Steps

1. Connect the device to your PC with cable and open the detected disk.

2. Copy the upgrade file and paste it to the root directory of the device.

3. Disconnect the device from your PC.

4. Reboot the device and then it will upgrade automatically. The upgrading process will be

displayed in the main interface.

After upgrading, the device reboots automatically. You can view the current version in Local

Settings → Device Information.

9.4 Restore Device

Go to Local Settings → Device Settings → Device Initialization to initialize the device and restore

default settings.