Manual

7
 Go to Settings → Palettes to select a
preferred palette, and press to save
and exit.
 Press in live view to switch palettes.
4.3 Set Level & Span
Set a display temperature range and palette only
works for targets within the temperature range.
You can get better image contrast by adjusting
the level & span parameters.
Steps:
1 In the live view interface, press to
show the menu.
2 Press / , and select Level & Span.
3 Select Setting Mode, and press to
switch auto and manual adjustment.
 In Auto mode, the device adjusts
display temperature range
automatically.
 In Manual mode, select Parameters to
enter the setting interface. Press
to lock or unlock the max.
temperature and min. temperature,
and press / to adjust
unlocked value. Or, unlock the max.
temperature and min. temperature,
and press / to increase or
decrease the individual values while
remaining the same temperature
range.
4 Press to save and exit.
4.4 Display OSD Info
Go to Settings → Display Settings to enable the
information on-screen display.
Parameters
Temperature measurement parameters such as
emissivity and distance.
Brand Logo
The brand logo is a manufacturer logo displayed
on the lower left corner of the screen. You can
turn it off if not needed.
5 Temperature Measurement
The temperature measurement function
provides the real-time temperature of the scene.
The temperature information is displayed on the
left top of your screen. The function is enabled
by default.