Manual

9
 Center: Display the center spot in the
scene and show the center
temperature.
4 Press to save and exit.
Result:
The device shows the real-time temperature on
the upper left side of live view interface.
5.3 Enhance High-Temperature Target
In target enhancement function, when the
target’s temperature is higher than the set value,
the target will become red.
Steps:
1 You can enable target enhancement
function by the following ways:
− Go to Settings → Palettes, and select
Above Alarm.
− Press in live view to switch the
palette to Above Alarm.
2 Go to Settings → Palettes → Temperature,
and press / to configure the
enhancement temperature threshold.
When the temperature of target is higher
than the set value, the target will be red in
live view.
3 Press to save and exit.
5.4 Set Temperature Alarm
Set the alarm rules and the device will alarm
when the temperature triggers the rule.
Steps:
1 In the live view interface, press to
show the menu.
2 Press / , and select Alarm.
3 Press to enable the function.
4 Select Measurement to set the alarm rule.
Select Alarm Threshold to set the threshold
temperature. When the target’s
temperature is higher or lower than the
threshold value, the device will output
alarm.
5 Press to save and exit.
6 Capture Snapshots
6.1 Capture One Image
You can capture snapshots in live view. The
snapshot will be automatically saved in the
albums.