Manual

10
Steps:
1 In the live view interface, you can capture
snapshots by the following ways.
− Press the trigger in live view to capture
snapshots.
− Hold the trigger in live view to locate the
target with laser light, and release the
trigger to capture snapshots.
Note
● Go to More Settings → Laser to turn on/off
laser light.
● You cannot capture snapshots when the
device is connected with PC.
2 Optional: If the thermal images are
exported and viewed on a high resolution
screen, enable SuperIR in the menu before
capturing. Resolution of captured images
with SuperIR is 4 times higher the original
one.
3 Optional: If a visual image is needed to be
saved separately, enable Save Visual Image
(only supported by the models with optical
lens).
What to do next:
You can view and manage the snapshots in the
album, and export them to PC.
6.2 View Snapshots
Steps:
1 In the live view interface, press to
show the menu.
2 Press / to select Albums, and
press to enter the album.
3 Press / to select the picture,
and press to view it.
4 Optional: Press to delete picture in
picture view interface. Press / to
switch the picture.
5 Press to exit.
6.3 Export Snapshots
Purpose:
Connect the device to your PC with Type-C cable,
and then you can export the captured
snapshots.
Steps:
1 Lift the type-C interface cover.
2 Connect the camera to your PC with Type-C
cable and open the detected disk.